Материал из Википедии — свободной энциклопедии
Парусное вооружение состоит из одного большого рейкового паруса, сшитого из вертикальных полотнищ. Длина гребного весла составляет 5,5 м.
Красивое и стройное судно с круто приподнятой к обеим оконечностям линией борта было построено целиком из дуба и богато орнаментировано. Исключительную мореходность этого типа судов практически доказали 12 молодых норвежцев в 1893 году. Построив точную копию гокстадского корабля, они успешно пересекли Северную Атлантику и прибыли в Чикаго на Колумбовскую выставку, показав среднюю скорость хода 9—10 узлов, что было весьма неплохо и для более поздних больших парусных судов[2].
Реплика гокстадского корабля, построенная в 1949 году в Швеции, не проплавала и года. Летом 1950 году судно «Ормен Фриске» погибло во время шторма вместе со всем экипажем.
Содержание
См. также
Примечания
Литература
- Амальрик А. С., Монгайт А. Л. В поисках исчезнувших цивилизаций. — М.: Наука, 1966. — 280 с.
- Фиркс И. Суда викингов. — Л.: Судостроение, 1982. — 104 с.
- Щепкин Е. Н. Скандинавский обряд погребения с кораблем // Журнал Министерства народного просвещения. — 1894. — Ч. 295. — С. 38—61.
Ссылки
- На Викискладе есть медиафайлы по теме Гокстадский корабль
Gokstad ship
From Wikipedia, the free encyclopedia
Contents
Discovery
The site where the boat was found, situated on arable land, had long been named Gokstadhaugen or Kongshaugen (from the Old Norse words konungr meaning king and haugr meaning mound), although the relevance of its name had been discounted as folklore, as other sites in Norway bear similar names. In 1880, sons of the owner of Gokstad farm, having heard of the legends surrounding the site, uncovered the bow of a boat while digging in the still frozen ground. As word of the find got out, Nicolay Nicolaysen, then President of the Society for the Preservation of Ancient Norwegian Monuments, reached the site during February 1880. Having ascertained that the find was indeed that of an ancient artifact, he liaised for the digging to be stopped. Nicolaysen later returned and established that the mound still measured 50 metres by 43 metres, although its height had been diminished down to 5 metres by constant years of ploughing. With his team, he began excavating the mound from the side rather than from the top down, and on the second day of digging found the bow of the ship.[3]
Construction
There are 16 tapered planks per side. The garboard planks are near vertical where they attach to the keel. The garboard planks are narrow and remain only slightly wider to take the turn of the bilge. The topside planks are progressively wider. Each oak plank is slightly tapered in cross section to allow it to overlap about 30mm the plank above and below in normal clinker (lapstrake) style. Iron rivets are about 180 mm apart where the planks lie straight and about 125 mm apart where the planks turn. [6]
At the bow, all of the planks taper to butt the stem. The stem is carved from a single curved oak log to form the cutwater and has one land for each plank. The inside of the stem is hollowed into a v shape so the inside of the rivets can be reached during construction or repair. Each of the crossbeams has a ledge cut about 25 mm wide and deep to take a removable section of decking. Sea chests were placed on top of the decking to use when rowing. Most likely on longer voyages sea chests were secured below decks to act as ballast when sailing. The centre section of the keel has little rocker and together with flat midships transverse section the hull shape is suited to medium to flat water sailing. When sailing downwind in strong winds and waves, directional control would be poor, so it is likely that some reefing system was used to reduce sail area. In such conditions the ship would take water aboard at an alarming rate if sailed at high speed. [7]
The ship was built to carry 32 oarsmen, and the oar holes could be hatched down when the ship was under sail. It utilized a square sail of approximately 110 square metres (1,200 sq ft), which, it is estimated, could propel the ship to over 12 knots (22 km/h; 14 mph). The mast could be raised and lowered. While the ship was traveling in shallow water, the rudder could be raised very quickly by undoing the fastening. Dendrochronological dating suggests that the ship was built of timber that was felled around 890 AD. This period is the height of Norse expansion in Dublin, Ireland and York, England. The Gokstad ship was commissioned at the end of the 9th century during the reign of King Harald Fairhair. The ship could carry a crew of 40 men but could carry a maximum of 70. The ship's design has been demonstrated to be very seaworthy.[8][9]
Human remains and grave goods
During the excavations, the skeleton of a male was recovered. The skeleton was found in a bed inside a timber-built burial chamber. The identity of the person buried is unknown. The skeleton shows that he was a man in his 40s - 50s, of powerful build and between 181 and 183 cm tall. The grave was furnished with grave goods. Apart from the ship itself, they consisted of three small boats, a tent, a sledge and riding equipment. It is believed that the mound was plundered in ancient times. The excavation in 1880 showed that valuables of gold and silver had been removed. In the Viking period, weapons were considered an important part of a man's grave goods. In the case of the Gokstad ship, any such weapons were probably taken by grave robbers. [10]
Public Exhibition
Currently the ship, the reconstructed burial chamber, two of the small boats and two tent boards from the burial chamber are displayed in the Viking Ship Museum located on Bygdøy peninsula in Oslo, Norway. Some other artifacts that survived the plundering are also on display in the museum. The ship will not be moved from Bygdøy, Kristin Halvorsen (Minister of Education) stated on May 3, 2012 — thirteen years after a debate regarding a possible relocation began.[11]
Replicas
Viking, an exact replica of the Gokstad ship, crossed the Atlantic Ocean from Bergen, Norway to be exhibited at the World's Columbian Exposition in Chicago in 1893; it remains on exhibit near Chicago. Other replicas include the Gaia, which currently has Sandefjord as its home port, the Munin, a half-scale replica in Vancouver, Canada,[12] the Íslendingur in the Viking World museum in Iceland, the Hugin, in Ramsgate, England, and a replica at the Hjemkomst Center in Moorhead, Minnesota. [13]
In popular culture
Gokstad is also the name of the ship of the character Tarvold in the fictional TV-show Viking Quest from the Entourage series on HBO.
Wikimedia Commons has media related to Gokstad ship. References
- "Gokstadskipet". Lokalhistoriewiki. Retrieved October 31, 2015.
- "Gaia, a replica of a Viking ship". Hvalfangstmuseet i Sandefjord. Retrieved October 31, 2015.
Related Reading
- Vinner, Max (2002)Boats of the Viking Ship Museum (Viking Ship Museum) ISBN 978-8785180636
- Williams, Gareth (2014) The Viking Ship (British Museum Press) ISBN 978-0714123400